Instalacija pomoću

Select and use ISOs

Uvod

Mageia is distributed via ISO images. This page will help you to choose which image match your needs.

There is two families of media:

Classical installer: After booting the media, it will follow a process allowing to choose what to install and how to configure your target system. This give you the maximal flexibility for a customized installation, in particular to choose which Desktop Environment you will install.

LIVE media: you can boot the media in a real Mageia system without installing it, to see what you will get after installation. The installation process is simpler, but you get lesser choices.

Details are given in the next sections.

Media

Definition

Here, a medium (plural: media) is an ISO image file that allows you to install and/or update Mageia and by extension any physical support the ISO file is copied to.

You can find them here.

Classical installation media

Common features

These ISOs use the traditional installer called drakx.

They are able to make a clean install or an update from previous releases.

DVD

Different media for architecture 32 or 64 bits.

Some tools are available in the Welcome screen: Rescue System, Memory Test, Hardware Detection Tool.

Each DVD contains many available desktop environments and languages.

You'll be given the choice during the installation to add non free software.

DVD dual arch

Both architectures are present on the same medium, the choice is made automatically according to the detected CPU.

Uses Xfce desktop only.

Not all languages are available. (be, bg, ca, de, en, es, fr, it, mk, pl, pt, ru, sv, uk) TO BE CHECKED!

It contains non free software.

Live media

Common features

Can be used to preview the distribution without installing it on a HDD, and optionally install Mageia on to your HDD.

Each ISO contains only one desktop environment (KDE or GNOME).

Different media for 32 or 64 bit architectures.

Live ISOs can only be used to create clean installations, they cannot be used to upgrade from previous releases.

They contain non free software.

Live CD KDE

KDE desktop environment only.

English language only.

32 bit only.

Live CD GNOME

GNOME desktop environment only.

English language only.

32 bit only.

Live DVD KDE

KDE desktop environment only.

All languages are present.

Different media for 32 or 64 bit architectures.

Live DVD GNOME

GNOME desktop environment only.

All languages are present.

Different media for 32 or 64 bit architectures.

Boot-only CD media

Common features

Each one is a small image that contains no more than that which is needed to start the drakx installer and find drakx-installer-stage2 and other packages that are needed to continue and complete the install. These packages may be on the PC hard disk, on a local drive, on a local network or on the Internet.

These media are very light (less than 100 MB) and are convenient when bandwidth is too low to download a full DVD, a PC without a DVD drive or a PC that can't boot from a USB stick.

Different media for 32 or 64 bit architectures.

English language only.

boot.iso

Contains only free software, for those people who refuse to use non-free software.

boot-nonfree.iso

Contains non-free software (mostly drivers, codecs...) for people who need it.

Downloading and Checking Media

Downloading

Once you have chosen your ISO file, you can download it using either http or BitTorrent. In both cases, a window gives you some information, such as the mirror in use and the possibility to change if the bandwidth is to low. If http is chosen, you may also see something like

md5sum and sha1sum are tools to check the ISO integrity. Use only one of them. Keep one of them for further usage. Then this window appears:

Check the radio button Save File.

Checking the downloaded media integrity

Both checksums are hexadecimal numbers calculated by an algorithm from the file to be downloaded. When you ask these algorithms to recalculate this number from your downloaded file, either you have the same number and your downloaded file is correct, or the number is different and you have a failure. A failure infers that you should retry the download.

Open a console, no need to be root, and:

- To use md5sum, type: [sam@localhost]$ md5sum path/to/the/image/file.iso.

- To use sha1sum, type: [sam@localhost]$ sha1sum path/to/the/image/file.iso.

and compare the obtained number on your computer (you may have to wait for a while) with the number given by Mageia. Example:

Burn or dump the ISO

The checked ISO can now be burned to a CD or DVD or dumped to a USB stick. These operations are not a simple copy and aim to make a boot-able medium.

Burning the ISO to a CD/DVD

Use whatever burner you wish but ensure the burning device is set correctly to burn an image, burn data or files is not correct. There is more information in the Mageia wiki.

Dump the ISO to a USB stick

All Mageia ISOs are hybrids, which means you can 'dump' them to a USB stick and then use it to boot and install the system.

Upozorenje

"dumping" an image onto a flash device destroys any previous file-system on the device; any other data will be lost and the partition capacity will be reduced to the image size.

To recover the original capacity, you must redo partitioning and re-format the USB stick.

Using a graphical tool within Mageia

You can use a graphical tool like IsoDumper

Using a graphical tool within Windows

You could try:

- Rufus using the "ISO image" option;

- Win32 Disk Imager

Using Command line within a GNU/Linux system

Upozorenje

It is potentially *dangerous* to do this by hand. You risk to overwrite a disc partition if you get the device-ID wrong.

You can also use the dd tool in a console:

Open a console

Become root with the command su - (don't forget the final '-' )

Plug your USB stick (do not mount it, this also means do not open any application or file manager that could access or read it)

Enter the command fdisk -l

Alternatively, you can get the device name with the command dmesg: at end, you see the device name starting with sd, and sdd in this case:

[72594.604531] usb 1-1: new high-speed USB device number 27 using xhci_hcd
[72594.770528] usb 1-1: New USB device found, idVendor=8564, idProduct=1000
[72594.770533] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[72594.770536] usb 1-1: Product: Mass Storage Device
[72594.770537] usb 1-1: Manufacturer: JetFlash
[72594.770539] usb 1-1: SerialNumber: 18MJTWLMPUCC3SSB
[72594.770713] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[72594.770719] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[72594.771122] usb-storage 1-1:1.0: USB Mass Storage device detected
[72594.772447] scsi host8: usb-storage 1-1:1.0
[72595.963238] scsi 8:0:0:0: Direct-Access     JetFlash Transcend 2GB    1100 PQ: 0 ANSI: 4
[72595.963626] sd 8:0:0:0: [sdd] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
[72595.964104] sd 8:0:0:0: [sdd] Write Protect is off
[72595.964108] sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00
[72595.965025] sd 8:0:0:0: [sdd] No Caching mode page found
[72595.965031] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[72595.967251]  sdd: sdd1
[72595.969446] sd 8:0:0:0: [sdd] Attached SCSI removable disk

Find the device name for your USB stick (by its size), for example /dev/sdb in the screenshot above, it is a 8GB USB stick.

Enter the command: # dd if=path/to/the/ISO/file of=/dev/sdX bs=1M

Where X=your device name eg: /dev/sdc

Example: # dd if=/home/user/Downloads/Mageia-4-x86_64-DVD.iso of=/dev/sdb bs=1M

Enter the command: # sync

Unplug your USB stick, it is done

DrakX, Mageia instalacijski program

Whether you are new to GNU-Linux or an experienced user, the Mageia Installer is designed to help make your installation or upgrade as easy as possible.

The initial menu screen has various options, however the default one will start the installer, which will normally be all that you will need.

Slika 1. Instalacijski zaslon dobrodošlice

Here are the default welcome screens when using a Mageia DVD, The first one with a legacy system and the second one with an UEFI system:

From this first screen, it is possible to set some personal preferences:

The language (for the installation only, may be different that the chosen language for the system) by pressing the key F2 (Legacy mode only)

Use the arrow keys to select the language and press the key Enter.

Here is for example, the French welcome screen when using a Live DVD/CD. Note that the Live DVD/CD menu does not propose: Rescue System, Memory test and Hardware Detection Tool.

Change the screen resolution by pressing the F3 key (Legacy mode only).

Add some kernel options by pressing the F6 key for the legacy mode or the e key for the UEFI mode.

If the installation fails, then it may be necessary to try again using one of the extra options. The menu called by F6 displays a new line called Boot options and propose four entries:

- Default, it doesn't alter anything in the default options.

- Safe Settings, priority is given to the safer options to the detriment of performances.

- No ACPI (Advanced Configuration and Power Interface), power management isn't taken into account.

- No Local APIC (Local Advanced Programmable Interrupt Controller), it is about CPU interruptions, select this option if you are asked for.

When you select one of these entries, it modifies the default options displayed in the Boot Options line.

Bilješka

In some Mageia releases, it may happen that the entries selected with the key F6 does not appear in the Boot Options line, however, they are really taken into account.

Add more kernel options by pressing the key F1 (Legacy mode only).

Pressing F1 opens a new window with more available options. Select one with the arrow keys and press Enter to have more details or press the Esc key to go back to the welcome screen.

The detailed view about the option splash. Press Esc or select Return to Boot Options to go back to the options list. These options can by added by hand in the Boot options line.

Bilješka

The help is translated in the chosen language with the F2 key.

For more information about kernel options on legacy and UEFI systems, see: https://wiki.mageia.org/en/How_to_set_up_kernel_options

Here is the default welcome screen when using a Wired Network-based Installation CD (Boot.iso or Boot-Nonfree.iso images):

It does not allow to change the language, the available options are described in the screen. For more information about using a Wired Network-based Installation CD, see the Mageia Wiki

Upozorenje

The keyboard layout is the American one.

The installation steps

The install process is divided into a number of steps, which can be followed on the side panel of the screen.

Each step has one or more screens which may also have Advanced buttons with extra, less commonly required, options.

Most screens have Help buttons which give further explanations about the current step.

Bilješka

If somewhere during install you decide to stop the installation, it is possible to reboot, but please think twice before you do this. Once a partition has been formatted or updates have started to be installed, your computer is no longer in the same state and rebooting it could very well leave you with an unusable system. If in spite of this you are very sure rebooting is what you want, go to a text terminal by pressing the three keys Alt Ctrl F2 at the same time. After that, press Alt Ctrl Delete simultaneously to reboot.

Installation Problems and Possible Solutions

No Graphical Interface

After the initial screen you did not reach the language selection screen. This can happen with some graphic cards and older systems. Try using low resolution by typing vgalo at the prompt.

If the hardware is very old, a graphical installation may not be possible. In this case it is worth trying a text mode installation. To use this hit ESC at the first welcome screen and confirm with ENTER. You will be presented with a black screen with the word "boot:". Type "text" and hit ENTER. Now continue with the installation in text mode.

The Install Freezes

If the system appeared to freeze during the installation, this may be a problem with hardware detection. In this case the automatic detection of hardware may be bypassed and dealt with later. To try this, type noauto at the prompt. This option may also be combined with other options as necessary.

RAM problem

These will rarely be needed, but in some cases the hardware may report the available RAM incorrectly. To specify this manually, you can use the mem=xxxM parameter, where xxx is the correct amount of RAM. e.g. mem=256M would specify 256MB of RAM.

Dynamic partitions

If you converted your hard disk from "basic" format to "dynamic" format on Microsoft Windows, you must know that it is impossible to install Mageia on this disc. To go back to a basic disk, see the Microsoft documentation: http://msdn.microsoft.com/en-us/library/cc776315.aspx.

Molim izaberite jezik koji želite koristiti

Select your preferred language, by first expanding the list for your continent. Mageia will use this selection during the installation and for your installed system.

If it is likely that you will require several languages installed on your system, for yourself or other users, then you should use the Multiple languages button to add them now. It will be difficult to add extra language support after installation.

Upozorenje

Even if you choose more than one language, you must first choose one of them as your preferred language in the first language screen. It will also be marked as chosen in the multiple languages screen .

If your keyboard language is not the same as your preferred language, then it is advisable to install the language of your keyboard as well.

Mageia uses UTF-8 (Unicode) support by default.

This may be disabled in the "multiple languages" screen if you know that it is inappropriate for your language. Disabling UTF-8 applies to all installed languages.

You can change the language of your system after installation in the Mageia Control Center -> System -> Manage localization for your system.

Licenca i bilješka o izdanju

Ugovor o licenci

Prijew instalacije Mageie, molim pročitajte pažljivo uvjete licence.

Ovi se uvjeti primjenjuju na cijelu Mageia distribuciju i moraju biti prihvaćeni prije nego što nastavite.

Za prihvaćanje jednostavno odaberite Prihvaćam i zatim kliknite na Slijedeće.

Ako odlučite ne prihvatiti ove uvjete, zahvaljujemo vam pto ste pogledali. Klikom na Isključi ponovno ćete pokrenuti vaše računalo.

Bilješke o izdanju

Da biste vidjeli što je novo u Mageii, kliknite na Bilješka o izdanju dugme.

Setup SCSI

DrakX usually detects hard disks correctly. With some older SCSI controllers it may be unable to determine the correct drivers to use and subsequently fail to recognise the drive.

If this happens, you will need to manually tell Drakx which SCSI drive(s) you have.

DrakX should then be able to configure the drive(s) correctly.

Install or Upgrade

Instaliraj

Use this option for a fresh Mageia installation.

Upgrade

If you have one or more Mageia installations on your system, the installer will allow you to upgrade one of them to the latest release.

Upozorenje

Only upgrading from a previous Mageia version that was still supported when this installer's version was released, has been thoroughly tested. If you want to upgrade a Mageia version that had already reached its End Of Life when this one was released, then it is better to do a clean install while preserving your /home partition.

Bilješka

If during install you decide to stop the installation, it is possible to reboot, but please think twice before you do this. Once a partition has been formatted or updates have started to be installed, your computer isn't in the same state anymore and rebooting it could very well leave you with an unusable system. If in spite of that you are very sure rebooting is what you want, go to a text terminal by pressing the three keys Alt Ctrl F2 at the same time. After that, press Alt Ctrl Delete simultaneously to reboot.

Savjet

If you have discovered that you forgot to select an additional language, you can return from the "Install or Upgrade" screen to the language choice screen by pressing Alt Ctrl Home. Do not do this later in the install.

Tipkovnica

DrakX selects an appropriate keyboard for your language. If no suitable keyboard is found it will default to a US keyboard layout.

Make sure that the selection is correct or choose another keyboard layout. If you don't know which layout your keyboard has, look in the specifications that came with your system, or ask the computer vendor. There may even be a label on the keyboard that identifies the layout. You can also look here: en.wikipedia.org/wiki/Keyboard_layout

If your keyboard isn't in the list shown, click on More to get a full list, and select your keyboard there.

Upozorenje

After choosing a keyboard from the More dialog, you'll return to the first keyboard choice dialog and it will seem as though a keyboard from that screen was chosen. You can safely ignore this anomaly and continue the installation: Your keyboard is the one you chose from the full list.

If you choose a keyboard based on non-Latin characters, you will see an extra dialog screen asking how you would prefer to switch between the Latin and non-Latin keyboard layouts

Particioniranje

In this screen you can see the content of your hard drive(s) and see the solutions the DrakX partitioning wizard found for where to install Mageia.

The options available from the list below will vary depending on your particular hard drive(s) layout and content.

Koristi postojeće particije

If this option is available, then existing Linux compatible partitions have been found and may be used for the installation.

Koristi slobodni prostor

If you have unused space on your hard drive then this option will use it for your new Mageia installation.

Use Free Space on a Windows Partition

If you have unused space on an existing Windows partition, the installer may offer to use it.

This can be a useful way of making room for your new Mageia installation, but is a risky operation so you should make sure you have backed up all important files!

Note that this involves shrinking the size of the Windows partition. The partition must be "clean", meaning that Windows must have closed down correctly the last time it was used. It must also have been defragmented, although this is not a guarantee that all files in the partition have been moved out of the area that is about to be used. It is highly recommended to back up your personal files.

With this option, the installer displays the remaining Windows partition in light blue and the future Mageia partition in dark blue with their intended sizes just under. You have the possibility to adapt these sizes by clicking and dragging the gap between both partitions. See the screen-shot below.

Izbriši i koristi cijeli disk.

Ova će opcija koristiti cijeli pogon za Mageiu.

Note! This will erase ALL data on the selected hard drive. Take care!

If you intend to use part of the disk for something else, or you already have data on the drive that you are not prepared to lose, then do not use this option.

Prilagođeno

This gives you complete control over the placing of the installation on your hard drive(s).

Partitions sizing:

The installer will share the available place out according to the following rules:

If the total available place is lower than 50 GB, only one partition is created for /, there is no separate partition for /home.

If the total available place is over 50 GB, then three partitions are created

6/19 of the total available place is allocated to / with a maximum of 50 GB

1/19 is allocated to swap with a maximum of 4 GB

the rest (at least 12/19) is allocated to /home

That means that from 160 GB and over of available place, the installer will create three partitions: 50 GB for /, 4 GB for swap and the rest for /home.

Bilješka

If you are using an UEFI system, the ESP (EFI System Partition) will be automatically detected, or created if it does not exist yet, and mounted on /boot/EFI. The "Custom" option is the only one that allows to check it has been correctly done

Upozorenje

Some newer drives are now using 4096 byte logical sectors, instead of the previous standard of 512 byte logical sectors. Due to lack of available hardware, the partitioning tool used in the installer has not been tested with such a drive. Also some ssd drives now use an erase block size over 1 MB. We suggest to pre-partition the drive, using an alternative partitioning tool like gparted, if you own such a device, and to use the following settings:

"Align to" "MiB"

"Free space preceding (MiB)" "2"

Also make sure all partitions are created with an even number of megabytes.

Odaberite mjesta montiranja

Ovdje možete vidjeti linux particije kje su nađene na vašem računalu. Ako se ne slažete sa DrakX sugerstijama, možete promjeniti točke montiranja.

Bilješka

Ako išta promjenite, budite sigurni da još uvijek imate / (root) particiju.

Svaka particija je prikazana kao što slijedi: "Uređaj" ("Kapacitet", "Točka montiranja", "Vrsta").

"Device", is made up of: "hard drive", ["hard drive number"(letter)], "partition number" (for example, "sda5").

Ako imate puno particija, možete izabrati mnogo različitih točaka montiranja iz padajućeg izbornika, kao što su /, /home and /var. Možete čak napraviti vlastite točke montiranja, na primjer /video za particiju gdje želite pohraniti filmove, ili /cauldron-home za/home particiju cauldron instalacije.

Za particije kojima nemate pristup, možete ostaviti prazno polje točke montiranja.

Upozorenje

Izaberite Prethodno ako niste sigurni što odabrati, i zatim označite Prilagođeno particioniranje diska. Na zalonu koji će uslijediti, kliknite na particiju da vidite vrstu i veličinu.

Ako ste sigurni da su točke montiranja ispravne, kliknite na Slijedeće, i izaberite želite li formatirati samo particiju(e) koje sugerira DrakX, ili više.

Confirm hard disk to be formatted

Click on Previous if you are not sure about your choice.

Click on Next if you are sure and want to erase every partition, every operating system and all data on that hard disk.

Custom disk partitioning with DiskDrake

Upozorenje

If you wish to use encryption on your / partition you must ensure that you have a separate /boot partition. The encryption option for the /boot partition must NOT be set, otherwise your system will be unbootable.

Adjust the layout of your disk(s) here. You can remove or create partitions, change the filesystem of a partition or change its size and even view what is in them before you start.

There is a tab for every detected hard disk or other storage device, like an USB key. For example sda, sdb and sdc if there are three of them.

Push Clear all to wipe all partitions on the selected storage device

For all other actions: click on the desired partition first. Then view it, or choose a filesystem and a mount point, resize it or wipe it.

Continue until you adjusted everything to your wishes.

Click Done when you're ready.

Bilješka

If you are installing Mageia on an UEFI system, check that an ESP (EFI System Partition) is present and correctly mounted on /boot/EFI (see above)

Formatiram

Here you can choose which partition(s) you wish to format. Any data on partitions not marked for formatting will be saved.

Uobičajeno je da barem particije koje je odabrao DrakX moraju biti formatirane.

Click on Advanced to choose partitions you want to check for so called bad blocks

Savjet

If you're not sure you have made the right choice, you can click on Previous, again on Previous and then on Custom to get back to the main screen. In that screen you can choose to view what is in your partitions.

When you are confident about the selection, click on Next to continue.

Odabir Medija (Konfiguracija dopunskog instalacijskog medija)

Ovaj zaslon daje vam listu već prepoznatih repozitorija. MOžewte dodati ostale izvore za pakete, poput optičkoga diska ili udaljenog izvora. Odabir izvora određuje koji paketi će biti dostupni za odabir tijekom idućih koraka.

Za mrežni izvor, postoje dva koraka koja trba slijediti:

Odabir aktivacije mreže, ako već nije aktivna.

Odabir ogledala ili određenog URL (prvi unos). Odabirom ogledala imate pristup odabiru svih repozitorija uprave Mageia, poput Nonfree, sa Tainted spremištem i ažuriranjem. Sa URL možete odrediti određeni repozitorij ili vlastitu NFS instalaciju.

Bilješka

Ako ažurirate 64 bitnu instalaciju koja može sadržavati 32 bitne pakete, preporučuje se da koristite ovaj zaslon za dodavanje mrežnog zrcala označavajuć jedan od prisutnig mrežnih protokola. DVD iso 64 bita sadrži samo 64 bitne i pakete bez određene arhitekture i neće moći ažurirati 32 bitne pakete. Međutim, nakon dodavanja mrežnog zrcala instaler će prnaći potrebne 32 bitne pakete.

Media Selection (Nonfree)

Here you have the list of available repositories. Not all repositories are available, according to which media you use for installing. The repositories selection determines which packages will be available for selection during the next steps.

The Core repository cannot be disabled as it contains the base of the distribution.

The Nonfree repository includes packages that are free-of-charge, i.e. Mageia may redistribute them, but they contain closed-source software (hence the name - Nonfree). For example this repository includes nVidia and ATI graphics card proprietary drivers, firmware for various WiFi cards, etc.

The Tainted repository includes packages released under a free license. The main criteria for placing packages in this repository is that they may infringe patents and copyright laws in some countries, e.g. Multimedia codecs needed to play various audio/video files; packages needed to play commercial video DVD, etc.

Odabir radnog okruženja

Ovisno o vašem odabiru, možda vam budu ponuđeni daljnji zasloni za fino ugađanje vašega izbora.

After the selection step(s), you will see a slide show during package installation. The slide show can be disabled by pressing the Details button

Choose whether you prefer to use the KDE or Gnome desktop environment. Both come with a full set of useful applications and tools. Tick Custom if you want to use neither or both, or if you want something other than the default software choices for these desktop environments. The LXDE desktop is lighter than the previous two, sporting less eye candy and fewer packages installed by default.

Odabir grupe paketa

Packages have been sorted into groups, to make choosing what you need on your system a lot easier. The groups are fairly self explanatory, however more information about the content of each is available in tool-tips which become visible as the mouse is hovered over them.

Radna stanica

Poslužitelj

Grafičko okruženje

Odabir pojedinačnih paketa: Možete koristiti ovu opciju za ručno dodavanje ili uklanajnje paketa.

Read the section called „Minimal Install“ for instructions on how to do a minimal install (without or with X & IceWM).

Minimal Install

You can choose a Minimal Installation by de-selecting everything in the Package Group Selection screen, see the section called „Odabir grupe paketa“.

If desired, you can additionally tick the "Individual package selection" option in the same screen.

Minimal Installation is intended for those with specific uses in mind for their Mageia, such as a server or a specialised workstation. You will probably use this option combined with the "Individual package selection" option mentioned above, to fine-tune your installation, see the section called „Izaberi pojedinačne pakete“.

If you choose this installation class, then the related screen will offer you a few useful extras to install, such as documentation and X.

If selected, "With X" will also include IceWM as lightweight desktop environment.

The basic documentation is provided in the form of man and info pages. It contains the man pages from the Linux Documentation Project and the GNU coreutils info pages.

Izaberi pojedinačne pakete

Ovdje možete dodati ili ukloniti dodatne pakete za prilagodbu vaše instalacije.

After having made your choice, you can click on the floppy icon at the bottom of the page to save your choice of packages (saving to a USB key works, too). You can then use this file to install the same packages on another system, by pressing the same button during install and choosing to load it.

Upravljanje korisnikom i superkorisnikom

Poostavi administratorsku (root) lozinku:

Preporučljivo je za sve Mageia instalacije postavit isuperkorisničku ili administrativnu lozinku, koju obično nazivamo root lozinka u linuxu. dok upisujete lozinku u gornje polje boja štita će se mijenjati od crvene preko žute do zelene ovisno o jačini lozinke. Zeleni štit pokazuje da koristite jaku lozinku. Morate ponoviti lozinku u donjem polju, što provjerava da niste krivo napisali prvu lozinku uspoređujući ih.

Bilješka

Sve su lozinke osjetljive n avelika i mala slova, pa je najbolje koristiti mješavinu slova (velikih i malih), brojeva i ostalih znakova u lozinki.

Unesite korisnika

Dodajte korisnika ovdje. korisnik ima manje ovlasti od superkorisnika (root), ali dovoljno da koristi internet,uredske programe ili igra igre i sve ostalo što prosječan korisnik radi sa svojim računalom.

Ikona: ako kliknete na ovo dugme promjeniti će ikonu korisnika.

Pravo ime: Umetni korisničko pravo ime u ovo tekstualno polje.

Ime prijave: Ovdje unesite korisnikovo ie prijave ili dopustite da drakx koristi verziju korisničkih pravih imena. Ime prijave je osjetljivo na mala i velika slova.

Lozinka: U tekstualno polje trebate uppisati korisničku lozinku. Na kraju tekstualnog polja nalazi se štit koji pokazuje snagu lozinke.(Također vidi Bilješka)

Lozinka (ponovno): Ponovno upišite korisničku lozinku u ovo tekstualno polje i drakx će provjeriti imate li istu lozinku u svakom tekstualnom polju.

Bilješka

Svaki korisnik kojeg dodate tijekom instalacije Mageie, će imati čitljiv ( ali zaštićen za pisanje) osobni direktorij.

However, while using your new install, any user you add in MCC - System - Manage users on system will have a home directory that is both read and write protected.

If you don't want a world readable home directory for anyone, it is advised to only add a temporary user now and to add the real one(s) after reboot.

If you prefer world readable home directories, you might want to add all extra needed users in the Configuration - Summary step during the install. Choose User management.

Dozvole pristupa također se mogu promjeniti nakon instlacije.

Napredno korisničko upravljanje

Ako je kliknuto na napredno dugme nudi vam se zaslon gdje možete urediti postavke korisnika kojega dodajete.

Dodatno, možete onemogućiti ili omogućiti račun gosta.

Upozorenje

Anything a guest with a default rbash guest account saves to his /home directory will be erased when he logs out. The guest should save his important files to a USB key.

Omogući račun gosta: Ovdje možete omogućiti ili onemogućiti račun gosta. Račun gosta dopušta gostu prijavu i korištenje PC-ja, ali ima ograničeniji pristup od normalnih korisnika.

Shell: This drop down list allows you to change the shell used by the user you are adding in the previous screen, options are Bash, Dash and Sh

User ID: Here you can set the user ID for the user you are adding in the previous screen. This is a number. Leave it blank unless you know what you are doing.

Group ID: This lets you set the group ID. Also a number, usually the same one as for the user. Leave it blank unless you know what you are doing.

Konfiguracija grafičke kartice i monitora

No matter which graphical environment (also known as desktop environment) you chose for this install of Mageia, they are all based on a graphical user interface system called X Window System, or simply X. So in order for KDE, Gnome, LXDE or any other graphical environment to work well, the following X settings need to be correct. Choose the correct settings if you can see that DrakX didn't make a choice, or if you think the choice is incorrect.

Graphic card: Choose your card from the list if needed.

Monitor: You can choose Plug'n Play when applicable, or choose your monitor from the Vendor or Generic list. Choose Custom if you prefer to manually set the horizontal and vertical refresh rates of your monitor.

Upozorenje

Incorrect refresh rates may damage your monitor

Resolution: Set the desired resolution and color depth of your monitor here.

Test: The test button does not always appear during install. If the button is there, you can control your settings by pressing it. If you see a question asking you whether your settings are correct, you can answer "yes", and the settings will be kept. If you don't see anything, you'll return to the configuration screen and be able to reconfigure everything until the test is good. Make sure your settings are on the safe side if the test button isn't available

Options: Here you can choose to enable or disable various options.

Choose an X Server (Configure your Graphic Card)

DrakX has a very comprehensive database of video cards and will usually correctly identify your video device.

If the installer has not correctly detected your graphic card and you know which one you have, you can select it from the tree by:

proizvođač

ime vaše kartice

vrsta kartice

If you cannot find your card in the vendor lists (because it's not yet in the database or it's an older card) you may find a suitable driver in the Xorg category

The Xorg listing provides more than 40 generic and open source video card drivers. If you still can't find a named driver for your card there is the option of using the vesa driver which provides basic capabilities.

Be aware that if you select an incompatible driver you may only have access to the Commandline Interface.

Some video card manufacturers provide proprietary drivers for Linux which may only be available in the Nonfree repository and in some cases only from the card manufacturers' websites.

The Nonfree repository needs to be explicitly enabled to access them. If you didn't select it previously, you should do this after your first reboot.

Izaberite vaš monitor

DrakX ima vrlo opsežnu bazu podataka monitora i obično će točno identificirati vaš.

Upozorenje

Odabirom monitora drugih karakteristika možete oštetiti vaš monitor i video sklopovlje. Molim ne pokušavajte tako nešto ukoliko ne znate što radite. Ako imate sumnji savjetujte se sa dokumentacijom svoga monitora

Prilagođeno

This option allows you to set two critical parameters, the vertical refresh rate and the horizontal sync rate. Vertical refresh determines how often the screen is refreshed and horizontal sync is the rate at which scan lines are displayed.

It is VERY IMPORTANT that you do not specify a monitor type with a sync range that is beyond the capabilities of your monitor: you may damage your monitor. If in doubt, choose a conservative setting and consult your monitor documentation.

Plug 'n Play

Ovo je zadana opcija i pokušava odrediti vrstu monitora iz baze podataka monitora.

Proizvođač

If the installer has not correctly detected your monitor and you know which one you have, you can select it from the tree by selecting:

proizvođač

ime proizvođača monitora

opis monitora

Generički

selecting this group displays nearly 30 display configurations such as 1024x768 @ 60Hz and includes Flat panel displays as used in laptops. This is often a good monitor selection group if you need to use the Vesa card driver when your video hardware cannot be determined automatically. Once again it may be wise to be conservative in your selections.

Glavne postavke bootloadera

With a Bios system

If you prefer different bootloader settings to those chosen automatically by the installer, you can change them here.

You may already have another operating system on your machine, in which case you need to decide whether to add Mageia to your existing bootloader, or allow Mageia to create a new one.

Savjet

The Mageia graphical menus are nice :

Using a Mageia bootloader

By default, Mageia writes a new GRUB (legacy) bootloader into the MBR (Master Boot Record) of your first hard drive. If you already have other operating systems installed, Mageia attempts to add them to your new Mageia boot menu.

Mageia now also offers GRUB2 as an optional bootloader in addition to GRUB legacy and Lilo.

Upozorenje

Linux systems which use the GRUB2 bootloader are not currently supported by GRUB (legacy) and will not be recognized if the default GRUB bootloader is used.

The best solution here is to use the GRUB2 bootloader which is available at the Summary page during installation.

Using an existing bootloader

If you decide to use an existing bootloader then you will need to remember to STOP at the summary page during the installation and click the Bootloader Configure button, which will allow you to change the bootloader install location.

Do not select a device e.g."sda", or you will overwrite your existing MBR. You must select the root partition that you chose during the partitioning phase earlier, e.g. sda7.

To be clear, sda is a device, sda7 is a partition on that device.

Savjet

Go to tty2 with Ctrl+Alt+F2 and type df to check where your / (root) partition is. Ctrl+Alt+F7 takes you back to the installer screen.

The exact procedure for adding your Mageia system to an existing bootloader is beyond the scope of this help, however in most cases it will involve running the relevant bootloader installation program which should detect and add it automatically. See the documentation for the operating system in question.

Bootloader advanced option

If you have very limited disk space for the / partition that contains /tmp, click on Advanced and check the box for Clean /tmp at each boot. This helps to maintain some free space.

With an UEFI system

With an UEFI system, the user interface is slightly different as you cannot choose the boot loader since only Grub2-efi is available.

If Mageia is the first system installed on your computer, the installer created an ESP (EFI System Partition) to receive the bootloader (Grub2-efi). If there was already UEFI operating systems previously installed on your computer (Windows 8 for example), the Mageia installer detected the existing ESP created by Windows and added grub2-efi. Although it is possible to have several ESPs, only one is advised and enough whatever the number of operating systems you have.

Don't modify the "Boot Device" unless really knowing what you do.

Add or Modify a Boot Menu Entry

With a Bios system

You can add an entry or modify the one you select first, by pressing the relevant button in the Bootloader Configuration screen and editing the screen that pops up on top of it.

Bilješka

If you have chosen Grub 2 as your bootloader, you cannot use this tool to edit entries at this step, press 'Next'. You need to manually edit /boot/grub2/custom.cfg or use grub-customizer instead.

Some things that can be done without any risk, are changing the label of an entry and ticking the box to make an entry the default one.

You can add the proper version number of an entry, or rename it completely.

The default entry is the one the systems boots into if you don't make a choice while booting up.

Upozorenje

Editing other things can leave you with an unbootable system. Please don't just try something without knowing what you are doing.

With an UEFI system

In this case you are using Grub2-efi and you cannot use this tool to edit entries at this step. To do that you need to manually edit /boot/grub2/custom.cfg or use grub-customizer instead. All you can do here, is to choose the default entry in the drop down list.

After a click on the Next button, another drop down list allows to choose the video resolution for Grub2 which is a graphical boot loader.

Summary of miscellaneous parameters

DrakX made smart choices for the configuration of your system depending on the choices you made and on the hardware DrakX detected. You can check the settings here and change them if you want after pressing Configure.

System parameters

Timezone

DrakX selected a time zone for you, depending on your preferred language. You can change it if needed. See also the section called „Konfigurirajte vremensku zonu“

Country / Region

If you are not in the selected country, it is very important that you correct the setting. See the section called „Select your Country / Region“

Bootloader

DrakX has made good choices for the bootloader setting.

Do not change anything, unless you know how to configure Grub and/or Lilo

For more information, see the section called „Glavne postavke bootloadera“

User management

You can add extra users here. They will each get their own /home directories.

Services:

System services refer to those small programs which run the background (daemons). This tool allows you to enable or disable certain tasks.

You should check carefully before changing anything here - a mistake may prevent your computer from operating correctly.

For more information, see the section called „Konfigurirajte vaše servise“

Hardware parameters

Keyboard:

This is where you setup or change your keyboard layout which will depend on your location, language or type of keyboard.

Mouse:

Here you can add or configure other pointing devices, tablets, trackballs etc.

Sound card:

The installer uses the default driver, if there is a default one. The option to select a different driver is only given when there is more than one driver for your card, but none of them is the default one.

Graphical interface:

This section allows you to configure your graphic card(s) and displays.

For more information, see the section called „Konfiguracija grafičke kartice i monitora“.

Network and Internet parameters

Network:

You can configure your network here, but for network cards with non-free drivers it is better to do that after reboot, in the Mageia Control Center, if you have not yet enabled the Nonfree media repositories.

Upozorenje

When you add a network card, do not forget to set your firewall to watch that interface as well.

Proxies:

A Proxy Server acts as an intermediary between your computer and the wider internet. This section allows you to configure your computer to utilize a proxy service.

You may need to consult your systems administrator to get the parameters you need to enter here

Sigurnost

Security Level:

Here you set the Security level for your computer, in most cases the default setting (Standard) is adequate for general use.

Check the option which best suits your usage.

Firewall:

A firewall is intended to be a barrier between your important data and the rascals out there on the internet who would compromise or steal it.

Select the services that you wish to have access to your system. Your selections will depend on what you use your computer for.

Upozorenje

Bear in mind that allowing everything (no firewall) may be very risky.

Konfigurirajte vremensku zonu

Odaberite vašu vremensku zonu birajući vašu državu ili grad blizu vas u istoj vremenskoj zoni.

Na slijedećem zaslonu moći ćete postaviti sat vašega sklopovlja na lokalno vrijeme ili na GMT, također poznat kao UTC.

Bilješka

Ako imate više operativinih sustava na vašem računalu, budite sigurni da su svi postavljeni na lokalno vrijeme ili na

Select your Country / Region

Select your country or region. This is important for all kinds of settings, like the currency and wireless regulatory domain. Setting the wrong country can lead to not being able to use a Wireless network.

If your country isn't in the list, click the Other Countries button and choose your country / region there.

Bilješka

If your country is only in the Other Countries list, after clicking OK it may seem a country from the first list was chosen. Please ignore this, DrakX will follow your real choice.

Input method

In the Other Countries screen you can also select an input method (at the bottom of the list). Input methods allow users to input multilingual characters (Chinese, Japanese, Korean, etc). IBus is the default input method in Mageia DVDs, Africa/India and Asia/no-India Live-CDs. For Asian and African locales, IBus will be set as default input method so users should not need to configure it manually. Other input methods(SCIM, GCIN, HIME, etc) also provide similar functions and can be installed if you added HTTP/FTP media before package selection.

Bilješka

If you missed the input method setup during installation, you can access it after you boot your installed system via "Configure your Computer" -> "System", or by running localedrake as root.

Konfigurirajte vaše servise

Ovdje možete postaviti koje servise (ne) pokrenuti kada podignete vaš sustav.

Postoje četiri grupe, kliknite na trokut ispred grupe za proširenje i vidite sve servise u grupi.

The setting DrakX chose are usually good.

If you highlight a service, some information about it is shown in the info box below.

Only change things when you know very well what you are doing.

Select mouse

If you are not happy with how your mouse responds, you can select a different one here.

Usually, Universal - Any PS/2 and USB mice is a good choice.

Select Universal - Force evdev to configure the buttons that do not work on a mouse with six or more buttons.

Konfiguracija zvuka

In this screen the name of the driver that the installer chose for your sound card is given, which will be the default driver if we have a default one.

The default driver should work without problems. However, if after install you do encounter problems, then run draksound or start this tool via MCC (Mageia Control Center), by choosing the Hardware tab and clicking on Sound Configuration at the top right of the screen.

Then, in the draksound or "Sound Configuration" tool screen, click on Advanced and then on Troubleshooting to find very useful advice about how to solve the problem.

Napredno

Clicking Advanced in this screen, during install, is useful if there is no default driver and there are several drivers available, but you think the installer selected the wrong one.

In that case you can select a different driver after clicking on Let me pick any driver.

Sigurnosna Razina

You can adjust your security level here.

Leave the default settings as they are, if you don't know what to choose.

After install, it will always be possible to adjust your security settings in the Security part of the Mageia Control Center.

Nadogradnje

Since this version of Mageia was released, some packages will have been updated or improved.

Choose yes if you wish to download and install them, select no if you don't want to do this now, or if you aren't connected to the Internet

Then press Next to continue

Čestitamo

Završili ste instaliranje i konfiguriranje Mageie i sada je sigurno ukloniti instalcijski medij i napraviti reboot računala.

After reboot, in the bootloader screen, you can choose between the operating systems on your computer (if you have more than one).

If you didn't adjust the settings for the bootloader, your Mageia install will be automatically selected and started.

Uživajte!

Visit www.mageia.org if you have any questions or want to contribute to Mageia

Uninstalling Mageia

Howto

If Mageia didn't convince you or you can't install it correctly, in short you want get rid of it. That is your right and Mageia also gives you the possibility to uninstall. This is not true for every operating system.

After your data backup, reboot your installation Mageia DVD and select Rescue system, then, Restore Windows boot loader. At the next boot, you will only have Windows with no option to choose your operating system.

To recover the space used by Mageia partitions on Windows, click on Start -> Control Panel -> Administrative Tools -> Computer Management -> Storage -> Disk Management to access to the partition management. You will recognize the Mageia partition because they are labeled Unknown, and also by their size and place in the disk. Right click on each of these partitions and select Delete. The space will be freed.

If you are using Windows XP, you can create a new partition and format it (FAT32 or NTFS). It will get a partition letter.

If you have Vista or 7, you have one more possibility, you can extend the existing partition that is at the left of the freed space. There are other partitioning tools that can be used, such as gparted, available for both windows and linux. As always, when changing partitions, be very careful, and make sure all important things have been backed up.