- Qt 6.10
- Qt Graphs
- Qt Graphs Configure Options
- Qt Graphs | Commercial or GPLv3

Theming ◦ Known Issues

# Qt Graphs Configure Options

This topic lists the configuration options that you can use to configure the Qt Graphs module build.

## Main Features

If you disable both of these main features, the module will not be built at all.

- `QT_FEATURE_graphs_2d` enables building the 2D graph support into the Qt Graphs module. It is `ON` by default.

  To disable, pass `-DFEATURE_graphs_2d=OFF` to CMake.

- `QT_FEATURE_graphs_3d` enables building the 3D graph support into the Qt Graphs module. It is `ON` by default.

  To disable, pass `-DFEATURE_graphs_3d=OFF` to CMake.

## Qt Graphs for 2D Features

If you disable all of these features, the Qt Graphs for 2D module will not be usable for anything. These options are not in effect if `QT_FEATURE_graphs_2d` is disabled.

- `QT_FEATURE_graphs_2d_area` enables building the area graph support into the Qt Graphs module. It is `ON` by default.

  To disable, pass `-DFEATURE_graphs_2d_area=OFF` to CMake.

  Enabling area graph will also enable LineSeries support, as that is the minimum requirement for creating area graphs. If SplineSeries is required for the `upperSeries` or `lowerSeries`, the `QT_FEATURE_graphs_2d_spline` option should also be enabled.

- `QT_FEATURE_graphs_2d_bar` enables building the bar graph support into the Qt Graphs module. It is `ON` by default.

  To disable, pass `-DFEATURE_graphs_2d_bar=OFF` to CMake.

- `QT_FEATURE_graphs_2d_donut_pie` enables building the donut and pie graph support into the Qt Graphs module. It is `ON` by default.

  To disable, pass `-DFEATURE_graphs_2d_donut_pie=OFF` to CMake.

- `QT_FEATURE_graphs_2d_line` enables building the line graph support into the Qt Graphs module. It is `ON` by default.

  To disable, pass `-DFEATURE_graphs_2d_line=OFF` to CMake.

- `QT_FEATURE_graphs_2d_scatter` enables building the scatter graph support into the Qt Graphs module. It is `ON` by default.

  To disable, pass `-DFEATURE_graphs_2d_scatter=OFF` to CMake.

- `QT_FEATURE_graphs_2d_spline` enables building the spline graph support into the Qt Graphs module. It is `ON` by default.

  To disable, pass `-DFEATURE_graphs_2d_spline=OFF` to CMake.

## Qt Graphs for 3D Features

If you disable all of these features, the Qt Graphs for 3D module will not be usable for anything. These options are not in effect if `QT_FEATURE_graphs_3d` is disabled.

- `QT_FEATURE_graphs_3d_bars3d` enables building the Bars3D graph support into the Qt Graphs module. It is `ON` by default.

  To disable, pass `-DFEATURE_graphs_3d_bars3d=OFF` to CMake.

- `QT_FEATURE_graphs_3d_scatter3d` enables building the Scatter3D graph support into the Qt Graphs module. It is `ON` by default.

  To disable, pass `-DFEATURE_graphs_3d_scatter3d=OFF` to CMake.

- `QT_FEATURE_graphs_3d_surface3d` enables building the Surface3D graph support into the Qt Graphs module. It is `ON` by default.

  To disable, pass `-DFEATURE_graphs_3d_surface3d=OFF` to CMake.

Theming ◦ Known Issues